Bird in Hand Farm

Bird in Hand Farm is an imaginary place.


Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts

Tuesday, January 18, 2011

Canvas Tool Wrap #2

Oops.  The pockets on the first wrap faced the wrong way. 

So, here is is again.
It measures 29.5" long by 26.5" wide.  The flaps measure 6".  Each pocket is 5 and 3/8ths inches deep.  The center section between the pockets is 2.75".   For each row of pockets the far right pocket is 3".  The remaining eleven pockets are 2".  It means that as the tools are facing each other, the openings of the pockets are offset.  Tools will go in handle first so the blades of the tools will lie exposed between the handles of tools in their opposite pockets.  Does that make sense?  The blades are then protected by the flaps.  The ties are 42" long.  I didn't sew the ties on first so I had to secure them by over sewing the pocket seams.  
 

I got the ties 20 years ago.  They came holding a futon into a roll.  They have traveled a long way waiting for the right project.  I really try not to save stuff like that because I think I could become a hoarder of stuff that has crafty potential if I am not careful..  These have escaped multiple purges.
Placement of the pockets on this one was tricky.  What I did was cut the  canvas 1.5" larger than the finished dimensions.  Then I folded it in half and pressed a center crease.  Everything was measured off the crease.  It worked.  The machine actually went through 6 layers of canvas in a few places.  It went slowly, but it went. 
I like it.  I hope my Dad does too.  I wonder if he would give me the original back?  It would work really well to store my DPNs.

Sunday, January 9, 2011

Learning hand sewing

Kiddo was still talking about wanting to learn how to sew.  I went looking for children's sewing projects and was a bit disappointed.   There is not much out there, and most of what is, is to sew stuffed animals.  We DO NOT need any more stuffed animals in this house! 
I found this pattern on Martha Stewart's website.  Regardless of what you might think of Martha, her projects are decent.  It's really small, so hand sewing won't take too long.  It's supposed to be made with wool suiting material.  I think I have wool in the attic, but when it came time to start we decided that it was too cold to go look up there.  We went with some scraps that I had leftover from a project that uses felted sweaters.  We used the gray thread so that she could see what she was doing.  Our hand sewing is a bit primitive.  That's okay.  We stuffed them with catnip that we found in the pantry and some fiberfill.  We used yarn for the tails.  She was very excited to learn how to braid.
It was free.  She is proud of her work.  The cats adore them.  Hurray!

Friday, December 31, 2010

She really, really wanted to learn how to sew....





Kiddo decided that she wanted to learn how to sew.  She kept asking, so it was more than a passing "I want that."

I suggested that she start with a pillow case because it is all straight lines.  We pulled up the Vanilla Joy Pillow Case Tutorial and wrote down what we would need.  On Wednesday, while picking up white wool yarn to dye, I also picked up 70% off Christmas Fabric.  Score!

We put the foot pedal on a stool for her and we were off.  She did really well controlling the speed.   Sewing the line where she wanted it to go was a bit more challenging, but she hung with it and got a lot better as we went along.

We had some technical difficulties.  Irons are hot.  Really hot.  The bobbin compartment got gummed up with lint and stopped cooperating.  Note to self: clean out and oil the machine.  The thread kept breaking.  Note to self: old (really old) thread dries out and gets brittle.  It got a bit frustrating for a while there.

But check out the results!
I think she likes it.
Mommy and Daddy's
Un-squished




Monday, December 27, 2010

Canvas Tool Wrap #1

My Dad is a carver.  He sent me the specs for the wrap last May.  I procrastinated.  A lot.

First, the sewing machine was buried.

Then, I did not have the right fabric. 

Then, I was making/doing something else.

Finally, I ran out of excuses and had to bite the bullet and just do it.  

The specs are pretty specific.  The machine had some issues going through multiple layers of canvas, and the corners are not the best, but it will work.  Once again, quilters tools came in handy for measuring and marking the tool slots.  A chalk marker was also really helpful.  I had to make the ties out of denim because there was no way that the machine would handle 5 layers of canvas.  I think they came out okay, and I'm even happy with the stitched initials.  
  
Happy Birthday Dad!
The back
The inside
The ties



Thursday, December 2, 2010

Chef Hats



Skiptomylou is a really neat website with tutorials on how to make all sorts of kid related stuff.  Her chef hat tutorial is excellent.  I made two to go with the aprons.  One for the the little boy who is getting the cookie mixes in jars.  The other, of course, is for kiddo.  But I admit, I sort of want one now too.  When I was a kid I wanted to be a pastry chef.   I bet I would have had some cool hats...

Because I already had the fabric from the shirts, the total cost was about $9 for interfacing and velcro.   But, I have enough of both left over to make four more hats if  I wanted.  I also had to improvise a compass to make a 18" diameter circle.  i took a piece of yarn and tied it to two pencils with 9" of string between them.  Then I put one in the middle of a piece of newspaper and drew a big circle around with the other.  It's not a perfect circle, but it works.  Gathering the circle fabric was not as easy as you might thing, but it all got in there. 

It probably took me about 3 hours total to make the two hats.  I'm really happy with them.

Wednesday, December 1, 2010

Little Kid Aprons


I did it.  I made aprons all by myself!  No pattern, directions, or anything.  I used kiddo's apron as a template and three old denim shirts that I had saved for the fabric.  They were free!  

Kiddos's template apron measured approx 16"x23."  

Step 1: Cut out the fabric leaving 2 extra inches on each of the sides and the top.  If you are using regular fabric, the square would be 20"x27".  I admit, I free-handed it.  I figure no one is going to check to make sure that the bottom hem is perfectly straight.

Step 2:  I used the backs of the shirts, so the shirt hem serves as the bottom hem of the apron.  I turned under the sides and top and hemmed them with the raw edges tucked under.

Step 3: Then I folded the apron in half longways and cut the slanted sides at a 60 degree angle from the top.  I wish that the top was not quite so narrow on mine, but they work.  A quilters ruler and a rotary cutter came in really handy. here.
Step 4: This is where it gets cool.  I turned the raw edge under and stitched it.  Then I turned and sewed it again with a 1.25" gap so that the angle edge acts like a sleeve.

Step 5: I cut leftover material from the shirts into 2.5" strips and mitered them together to become very long (7 feet-ish).   I pinned them so that they were folded around the raw edges and stitched them, so that they became long, somewhat stiff ties.

Step 6: I tied the thread tails to a pencil.  I pushed the pencil through each sleeve and drew the tie through.  The long tie goes up one side sleeve, around the neck, and back down the other sleeve.  That way it is fully adjustable.  I hate aprons where the neck loop is too big. 

Step 7: The little boy apron seemed kind of plain so I picked the pocket off one of the shirts and sewed it onto the apron.  Much better.

I kept making kiddo try one on to make sure it was the right size.  She was a little bit a annoyed because it was not for her.  Little does she know that I made the one from the embroidered shirt for her.  She will find out Christmas morning.

Tomorrow, I will make the chef hats.

Monday, October 4, 2010

Remember the purple fabric from the swap?

I had some pink fabric left over from kiddo's pillow case.  And, as you will recall, Laura sent me some very pretty fat quarters.  I decided that Sweet Pea could have a second pillowcase and we could have a set too.  

Step 1: Fabric shopping!  We went to Calico Gals.  I love shops like this and I really want them to do well.  I did not want to spend $36 to be able to make 3 pillow cases.  Oh well.  I did not even look at fabric price.  I bought what I liked.  She liked this really fun pig print.

Step 2. Cutting.  Discovered that my old rotary cutter is pretty dull.  Tearing along the grain works really well and is faster.

Step 3. Piecing.  Laura sent me fat quarters, and I needed fabric that was 43" wide.  To make the seems disappear, I mitered them.

Step 4: Sew, sew, sew!  Fought a bit with the machine tension before I realized that the bobbin was improperly threaded...

Here they are on our bed.  The quilt is my Autumn Trip Around the World.  I love this quilt and every year it makes it onto the bed sometime in late September.  In 2003, this quilt won Best in Show at the Oswego County Fair.  I think it needed it's own special pillow cases.

Thanks Laura for the fabric and inspiration!

Wednesday, September 22, 2010

A little bit of redemption

Any type of place where I can buy fabric, yarn, or crafty stuff is dangerous for me.  A year ago (or more), the kid and I went to check out Hobby Lobby.  It was a neat store.  I had recently seen a pattern for making your own pillow cases, so I bought some flannel fabric to make her one.  She picked out flannels in a blue Hello Kitty print and a pink and white stripe.  The fabric got washed, folded, and put up in my sewing room.  There it sat.  The spark of creativity that said "making a pillow case would be a good thing" had left.  I have more unfinished projects than I would like to admit.

This weekend, the kid saw the fabric and asked what they were for.  She still likes Hello Kitty.  I hate that I spent the money a year ago for nothing.  I started researching how to make a pillow case.  I found the original tutorial I had looked at months ago.   Vanilla Joy Pillowcase Tutorial

Last night, the kid was bouncing around making the Farmer crazy, so I decided we would do the pillow case project together.  The stuff I had read said that this would take less than an hour.  With her "help" it took longer, but it was good to spend time together and she got to practice some fine motor skills and get more familiar with sewing.

It was pretty easy and came out very sweet.  The lesson here is to just do it.  Pick up one of those unfinished projects and spend an hour on it.  See how far you progress.  The kid is sleeping with hers tonight.